用騎馬訂書機，將套帖配好的書芯連同封面一同，在書脊上用兩個鐵絲扣訂牢成為書刊。由于在套帖及打釘時,書帖是由中心處攤開上下疊,好像馬鞍狀,所以稱為“騎馬訂”。騎馬訂是一種快速又便宜的裝訂方法。

　　With a horse-riding stapler, the book core with the cover of the set is fastened firmly with two wires on the spine of the book. Because in the set and nailing, the book posts are spread up and down from the center like saddles, so they are called "riding stitches". Binding on horseback is a fast and inexpensive binding method.

　　騎馬訂具有快速快捷、開書度可達l80。的優點,常為出版業界所運用。當然它也有缺點,以下是設計時有必要留意的事項。

　　Riding Binding has fast speed and Book opening up to l80. The advantages are often used by the publishing industry. Of course, it also has shortcomings. Here are some things that need to be noticed when designing.

　　1、采用騎馬訂的書不宜太厚，而且多帖書有必要套合成一整帖才干裝訂。超過64P以上的較厚書本,不適合用騎馬汀,主要有鎖線膠訂和無線膠訂兩種裝訂方法。鎖線膠訂是將配好的書帖,按順序用線一帖帖串遠來,可用于任何厚度的書,結實、翻閱便利,.可是裝訂速度慢。

　　1. Books bound by horseback should not be too thick, and it is necessary to compose a whole set of books to bind. Thicker books over 64P are not suitable for horseback riding. There are two main binding methods: thread binding and wireless binding. Lock-line binding is a kind of book posts matched, which can be used for books of any thickness. It is strong and easy to read, but the binding speed is slow.

　　2、沒有書背,晦氣陳列檢索。

　　2. No book back, obscure display and retrieval.

　　3、騎馬訂在套帖時靠中心的書帖容易向外架空,架空的程度與紙張厚度成正比,而導致三邊裁切后書背到書口的寬度紛歧,接近中心的冊頁比接近封面的冊頁要窄小些。

　　3. When riding a horse to fix a set of posts, the posts close to the center are easy to be overhead. The degree of overhead is proportional to the thickness of the paper, which results in the width of the back to the opening of the book after trilateral cutting. The pages close to the center are narrower than those close to the cover.

　　4、騎馬訂的書刊經多次翻閱后,容易松脫,而且接近中心的冊頁還會持續向外架空。

　　4. The books and periodicals subscribed by horseback riding are easy to loosen after repeated reading, and the pages close to the center will continue to be overhead.

　　上述缺點請在采用騎馬訂進行書刊制作時,務必特別留意和避免發作過錯。

　　The above shortcomings should be paid special attention to and avoided when making books and periodicals with horseback-riding binding.

　　平訂常見的雜志類都采用騎馬訂,一般有1個、兩個或許多個騎馬釘。1個釘的主要是很小的手|騎馬訂冊、產品運用說明書等。一般雜志、畫冊類的|都用兩個釘,如果是8K以上的大畫冊,則有或許依據需要用2個到4個釘,釘在書內的折疊處。一般裝訂48P以下,少量的能夠到64P,這要依據整本書用的紙張厚度而定,如果太厚就7適合用騎馬訂。騎馬訂裝訂方法簡略、,廣泛運用于宣揚手冊、新聞資料、雜志、畫子等,而且合作了主動化機械設備今后,比如騎馬訂裝訂機、主動折頁機等,其作業的效率很高。

　　Binding magazines are usually horseback-riding, usually with one, two or more horseback-riding nails. One nail is mainly a small hand 65 Ordinary magazines and picture albums use two nails, if it is a large picture album over 8K, there may be two or four nails to be nailed in the fold of the book according to the need. Usually binding is less than 48P, a small amount can reach 64P, depending on the thickness of the paper used in the whole book, if too thick, 7 is suitable for horseback binding. The method of horseback binding is simple and professional. It is widely used in publicizing brochures, news materials, magazines, paintings, etc. Moreover, it has cooperated with the active mechanical equipment in the future, such as horseback binding machine, active folding machine, etc. Its operation efficiency is very high.

　　縫線騎馬訂：

　　Seam stitching:

　　縫線騎馬訂的裝訂方法和騎馬訂相似,僅僅改用縫線機進行書脊的縫合作業,運用于書刊內頁、學生作業簿等,結實'性更勝騎馬訂。

　　The binding method of sewing and horseback binding is similar to that of horseback binding. Only sewing machine is used to sew the spine of a book. It is applied to the inside pages of books and periodicals, student workbooks and so on. The binding method is stronger than that of horseback binding.

　　1、騎馬釘裝釘方法，是在書脊處打入鋼釘。

　　1. The mounting method of horse-riding nails is to insert steel nails into the spine of the book.

　　2、依先后順序運用騎馬訂的套帖方法配帖。

　　2. Use the set method of horse-riding order to match the posts.

　　3、騎馬訂裝汀方法,打入鋼釘固定后再經三邊裁切完結。

　　3. Binding method for horseback riding. Fixed with steel nails and trilaterally trimmed.