經過長期的調查之后，發現有一些印刷公司在發排的過程中經常會碰到一些問題，想丟字、亂碼、圖像變形、文字錯位等等相關。有很多的問題在印刷制作中稍微用心注意一下是可以避免的，小編就將一些制作過程中需要注意的問題提出，供大家參考。
After a long-term investigation, it is found that some printing companies often encounter some problems in the process of distribution, such as word loss, scrambling, image distortion, text misplacement and so on. There are many problems that can be avoided if we pay attention to them carefully in the process of printing production. The edition will put forward some problems that need attention in the process of production for your reference.
1、做過排版的人們都知道，濟南印刷廠在處理文字的時候是不可以選擇文字加粗工具的，這樣就會造成問題的邊緣有重影(中文狀態下)，如果是在排版的過程中需要使用比較粗的文字，應當改為線條較粗的字體，而不是選擇使用文字加粗工具。
1. People who have done typesetting know that Jinan Printing Factory can not choose the tool of text coarsening when dealing with text, which will cause the problem of edge duplication (in the Chinese state). If it needs to use coarse text in the typesetting process, it should be changed to the font with thicker lines instead of choosing to make it. Use the Word Coarsening Tool.
2、發排之前檢查壓印。pagemaker中黑字自動壓印的，但是一些色塊、線條則需要自己去做，Freehand、IIIustrator等軟件都是需要設定黑板壓印的。對于其他的顏色如果需要壓印的話就需要在軟件中自己設定。大家設定黑版壓印之后一定要檢查灰色的地方不可壓印。
2. Check the stamping before sending and typesetting. In pagemaker, black letters are automatically imprinted, but some color blocks and lines need to be done by themselves. Freehand, III ustrator and other software need to set the blackboard imprint. For other colours, if you need to press, you need to set it in the software. Everyone must check the gray area after setting the black plate to be imprinted.
3、IIIustrator軟件做好的頁面如果直接發排的話速度比較慢，有時候頁面的大小也是會有變化，可以將其存為EPS文件置入pagemaker軟件中發排，速度相對來說比較快，但是沒有壓印效果，因此需要根據頁面的情況選擇發排方式。
3. The pages made by IIIustrator software are slow if they are directly distributed and typesetted. Sometimes the size of pages will change. They can be stored as EPS files in PageMaker software for distribution. The speed is relatively fast, but there is no impression effect. Therefore, we need to choose the typesetting method according to the situation of pages.
4、圖像在排版軟件當中好不要切割、旋轉、縮放。在排版軟件當中旋轉圖像會增長發排的時間。在排版軟件當中的圖像顯示是粗顯，裁剪、縮小圖像都會不準確，且這種裁切、縮小的方式沒有減少圖像的信息量，是不能縮短發排的時間的。在排版軟件當中放大圖像的話會影響圖像質量。因此完成圖像的旋轉、裁剪、縮放好是在處理圖像軟件當中去進行。
4. Image in typesetting software is best not to cut, rotate, zoom. Rotating images in typesetting software increases the time of typesetting. In typesetting software, the image display is rough, and the cutting and shrinking of images are inaccurate. Moreover, the way of cutting and shrinking does not reduce the amount of information of images, and can not shorten the time of distribution. In typesetting software, enlarging the image will affect the image quality. Therefore, the best way to complete image rotation, cropping and scaling is to use image processing software.
5、發排版過程當中，特別是中英文混排的時候，注意不可以使用齊行和強行齊行，因為這樣制作出來的頁面往往在屏幕上顯示首尾已經對齊，但是實際輸出的結果卻沒有完成這一個功能。
5. In the process of typesetting, especially when mixing Chinese and English, pay attention to not using parallel and forced parallel, because the pages produced in this way often show alignment at the beginning and end of the screen, but the actual output results do not complete this function.
6、有些RIP在處理拼版軟件發排的信息較大TIFF圖會出現錯誤，所以說信息量大的圖像好存儲為EPS格式在進行發排處理。
6. Some RIPs will make mistakes when dealing with TIFF maps with large amount of information emitted by spelling software. Therefore, images with large amount of information should be stored in EPS format for distribution processing.
7、使用PC平臺進行排版軟件發排進行時，盡可能避免使用下載的字體進行輸出，這種情況出現錯誤的幾率很高，經常會出現亂碼的問題，應該在PC平臺上和RIP山同時安裝相同的字庫才可以。
7. When using PC platform for typesetting software distribution, try to avoid using downloaded fonts for output. This situation has a high probability of errors, often encoding problems. We should install the same font library on PC platform and RIP mountain at the same time.
8、輸出在PC平臺山使用，用Word軟件制作的頁面時，應該注意頁面要為純色頁面，因為Word軟件制作出的彩色頁面都是RGB模式的，進行發排打印輸出的時候會有一定的問題出現，即使在RIP中分色也經常會發生錯誤。
8. Output is used in PC platform hill. Pages made with Word software should be pure color pages. Because the color pages produced by Word software are all RGB mode, there will be some problems when printing and output. Even in RIP, color errors often occur.
These are the problems that printing companies should avoid in front of typesetting. If you need customization of Jinan calendar, you can click on our official website directly for consultation: http://www.seven2000.com/
