Jinan packaging printing plate combination means that the packaging box printing factory arranges the printed pages according to the folding method and page sequence, the size of the printing format and the size of the printed paper. The combination can be divided into two types: part combination and Book combination. What are the requirements for merge printing?

　　1. 打印方向要求

　　1. Printing direction requirements

　　無論是單幅印刷還是多幅印刷，都應先用格確定印刷方向，然后在屏幕上用其他彩版標記。例如，在單版印刷中，步是在屏幕上指定配色方案。如果與***格在左右平行位置匹配，印版在機器上應與油墨轉移方向一致;如果兩種顏色在上下位置相匹配，機器上的印版應跨越形狀和油墨傳播方向的方向。印刷廠印刷多個印版，所有印版都是按這個方向印刷的。因為不同顏色的油墨必須并排放在墨桶中，只有當印版適應了這一客觀條件，才能達到彩色印刷的目的。

　　Whether it is single printing or multiple printing, the printing direction shall be determined with the grid first, and then the screen shall be marked with other color plates. For example, in single print, the first step is to specify a color scheme on the screen. If it is matched with the grid at the left and right parallel positions, the printing plate on the machine shall be consistent with the ink transfer direction; if two colors are matched at the up and down positions, the printing plate on the machine shall cross the shape and the direction of ink transmission. The printing house prints multiple plates, all of which are printed in this direction. Because different colors of ink must be placed in the ink barrel, only when the printing plate adapts to this objective condition, can the purpose of color printing be achieved.

　　2. 多版本組合的基本要求

　　2. Basic requirements for multi version combination由于用***格打印方向的問題，當與若干個印版組合時，可組合成若干個印版頭對頭、腳對腳等，盡量在兩個印版連接的位置上打印相同的顏色。印刷時，你可以把兩種油墨合在一起。例如，四個盤子放在一起形成一個矩形盤子，每個盤子占據一個角度，被分成兩對盤子，兩對盤子面對面放在一起。這樣，印版就可以少用一塊印版了。滾筒分為三部分，上墨和上墨形式分別為:深墨、淺墨和深墨。如果要使印版在同一方向上，有必要將油墨分為四部分，即:深光、淺光、深光。這樣，不但使用了油墨擋板，而且不利于油墨的安裝和放置，也不利于控制油墨的混合。當同時打印兩個版本時，兩個版本也可以被放置在與四個版本的一半相同的打印位置。這樣既可以節省油墨擋板，又可以使兩個版本的混合效果一致。為了便于打印，打印出來的紙可以切成四頁，然后倒過來打印。

　　Due to the problem of printing direction with When printing, you can combine the two inks. For example, four plates are put together to form a rectangular plate. Each plate occupies an angle and is divided into two pairs of plates. Two pairs of plates are placed face to face. In this way, the plate can be used less than one plate. Drum is divided into three parts, ink and ink forms are: deep ink, light ink and deep ink. If you want to make the plate in the same direction, it is necessary to divide the ink into four parts: deep light, light light and deep light. In this way, not only the ink baffle is used, but also is not conducive to the installation and placement of ink, and is not conducive to the control of ink mixing. When printing two versions at the same time, the two versions can also be placed in the same printing position as half of the four versions. This can not only save ink baffle, but also make the mixing effect of the two versions consistent. For printing convenience, the printed paper can be cut into four pages and printed upside down.

　　印刷價格變得如此之高，以于除了成本，印刷質量也很難保證。因此，對于對印刷質量有嚴格要求的客戶，我們不建議您選擇一種經濟的印刷方式。

　　The price of printing has become so high that in addition to the cost, the quality of printing is difficult to guarantee. Therefore, for customers who have strict requirements on printing quality, we do not recommend you to choose an economic printing method.

　　以上是濟南包裝印刷廠家為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://www.seven2000.comThe above is the relevant content introduced by Jinan packaging and printing factory. To learn more, please visit the website: http://www.jingyinshua.com