Some companies usually use handbags to achieve the desired results for ease of use and promotion. Although handbag printing is a very simple matter, there are still many problems to be noted. Next, let's take a look at the matters needing attention in handbag printing.

1、干燥問題。

1, the problem of drying.

在手提袋印刷的過程中，干燥問題一直是需要考慮的。因為手提袋印刷是一種高速印刷，這種快速印刷對于干燥度的要求很高，干的慢就會沾到其他東西，這時候就需要加入一些干燥劑，這樣才能保證整體質量。

In the process of handbag printing, the problem of drying is always something to consider. Because handbag printing is a kind of high-speed printing, this rapid printing for dryness requirements are very high, dry slowly will be stained with other things, this time you need to add some desiccant, so as to ensure the overall quality.

2、注意設備。

2, pay attention to equipment.

設備是印刷質量的保證，所以一定要保證機器的正常運轉和清潔，要注意使用完畢以后使用清洗劑認真清洗，這也是對企業的負責。

Equipment is the guarantee of printing quality, so we must ensure the normal operation of the machine and clean, pay attention to the use of cleaning agent after the use of serious cleaning, this is also the responsibility of enterprises.

3、光和溫度。

3, light and temperature.

在保證自己使用油墨質量的情況下，在印刷過程中一定要避免陽光直射，并且還要注意保持室內溫度，陽光直射和溫度過高都會影響油墨的效果。

In the case of ensuring the quality of their own use of ink, in the printing process must avoid direct sunlight, and also pay attention to maintaining indoor temperature, direct sunlight and temperature will affect the effect of ink.

4、注意墨的使用。

4, pay attention to the use of ink.

墨是在印刷上需要特別注意的問題，因為墨水不好對印刷質量有很大問題，所以在使用墨的時候一定要注意選擇，并注意墨的使用問題。

Ink is a special issue in printing, because the ink is not good for printing quality has a big problem, so when using ink must pay attention to the choice, and pay attention to the use of ink.

另外，在印刷過程中水的使用也是非常重要的，因為可以有效控制水墨粘度，同時還能起到平衡ph值的作用。所以千萬要注意，使用水的時間和時機。

In addition, the use of water in the printing process is also very important, because it can effectively control ink viscosity, but also play a role in balancing the pH value. So we must pay attention to the time and opportunity of using water.