在我們的生活中，常常用到印刷品。學生時代打印的試卷，復印的論文;求職時打印的簡歷，復印的獲獎證書;工作中打印的合同……這些都需要我們去印刷。以上列舉的這些，有的是路邊簡簡單單的圖文店就可以做到的，有些則需要印刷廠來完成。
Printed matter is often used in our daily life. Examination papers printed in student days, photocopied papers, resumes printed in job hunting, award-winning certificates duplicated, contracts printed in work... All of these need us to print. Some of these listed above can be done by a simple roadside graphic shop, while others require a printing plant to complete.
下面我們來為大家講講印刷過程中需要注意哪些問題吧!
Now let's talk about the problems we need to pay attention to in printing process.
1、印刷不容易干燥的產品時，堆印刷品的高度不宜過高。在墨層固著后，將印張輕輕抖動，可增加墨層與空氣接觸，加速油墨干燥。
1, when printing products that are not easy to dry, the height of stack prints should not be too high. After the ink layer is fixed, the printing pad lightly jitter, which can increase the contact between the ink layer and the air, and accelerate the drying of the ink.
2、當印刷幅面增大后，原先印刷紙張幅面所處的位置易出現壓力不足的現象。
2. When the printing width increases, the position of the original printing paper is easy to appear the phenomenon of insufficient pressure.
3、在印刷要求較高的產品而數量又不多的情況下，可以考慮減少印版的拼數，用較小尺寸的紙張來印刷，以提高套印精度。
3. In the case of printing products with higher requirements and less quantity, we can consider reducing the number of printing plates and printing with smaller size of paper to improve the accuracy of overprinting.
4、設計版面盡量避免相同區域正反面均為大墨量印刷，且在保證顏色的情況下，盡量減少大墨量區域油墨的供給量，以免出現起泡問題。
4. Designing the layout as far as possible to avoid the same area of the positive and negative are large ink printing, and to ensure the color of the case, as far as possible to reduce the supply of large ink area ink, in order to avoid blistering problems.
5、在四色印刷中，大面積黑色實地部分加30%左右的藍，使黑色實地墨色厚實、均勻美觀。
5. In four-color printing, a large area of black solid part plus about 30% blue, so that black solid ink thick, uniform and beautiful.
6、印刷色序可根據印刷版面的色調進行調節。
6, printing color sequence can be adjusted according to the color of printed page.
7、建議將輸紙輪、毛刷輪盡量放置在印張上的空白處或淺色調處，以避免輸紙輪、毛刷輪引起的印跡蹭臟。
7. It is suggested that the paper feeding wheel and brush wheel should be placed as far as possible in the blank or light tone on the stamp to avoid the stain caused by the paper feeding wheel and brush wheel.
8、遇到油墨不干的現象，可在潤版液中適當添加異丙醇，加快水分的蒸發。
8, when the ink does not dry, it is possible to add isopropanol in the fountain solution to speed up the evaporation of water.
以上就是我們為大家介紹的有關于印刷的常識了，然大家不一定會接觸到印刷這個行業，但我們了解的這些知識，在以后的生活中也一定會用上。
The above is what we introduce to you about the printing of common sense, most of all, you do not necessarily come into contact with the printing industry, but we understand these knowledge, in the future life will also be used.
This article is from Jinan handbag. For more information, please click: http://www.seven2000.com/. If there is any need for printing, please contact us. We are happy to help you.
