手提袋印刷尺寸：
Printed Size of Handbag:
手提袋印刷的尺寸通常根據包裝品的尺寸而定。通用的手提袋印刷標準尺寸分三開，四開或對開三種。每種又分為正度或大度兩種。其手提袋印刷凈尺寸由長×寬×厚組成，比如:我們在市面上常見的手提袋尺寸:400mm*300mm*80mm,這種手提袋是非常合理的尺寸,是一張正底的紙分成兩個來印刷,就是我們常說的正對開手提袋.有時候我們經常會發現同樣是正對開的尺寸做成的手提袋可看上去就不一樣的大小,這就是因為雖然印刷的時候可以同樣用正對開的紙張,可是在糊制的時候可以根據自己的需要變成不同的寬與高或者厚度.
The size of handbag printing usually depends on the size of the package. The standard sizes of general handbag printing are divided into three parts, four parts or opposite parts. Each is divided into positive or large. The net print size of the handbag is composed of length, width and thickness. For example, the size of the handbag we commonly see on the market is 400mm * 300mm * 80mm. This kind of handbag is a very reasonable size. It is a paper with a positive bottom that is printed in two parts, which is what we often call a handbag with a positive opening. Sometimes we often find that the same size is also a positive opening. The handbags can look different in size. This is because although they can be printed on opposite sheets of paper, they can be made into different sizes or thicknesses according to their own needs when pasting.
手提袋印刷紙張：
Handbag Printed Paper:
手提袋印刷的紙張可選用200g,250克的銅版紙。如需與較重的包裝品配套，可選用210克,230克,250克,的白卡紙,或300g銅版紙印刷。200克或者250克的銅版紙摸上去有些軟,但它的韌性比較好,210克或230克,250克的白卡紙制作出來的手提袋比較硬,看上去很挺的感覺,由于是單面的銅版紙,所以袋子里面看上去是很粗糙的,并且它的韌性不好,在折角的地方容易開裂.
Handbag printed paper can be 200 g, 250 g copperplate paper. For heavy packages, 210 grams, 230 grams, 250 grams of white cardboard or 300g copperplate paper can be used for printing. 200 grams or 250 grams of copperplate paper feel a little soft, but its toughness is better, 210 grams or 230 grams, 250 grams of white cardboard made of handbags are hard, look very good feeling, because it is one-sided copperplate paper, so the inside of the bag looks very rough, and its toughness is not good, easy to crack in the corner.
如選用銅版紙或卡紙印刷手提袋，一般需覆膜來增加其強度。此外，白牛皮紙由于其韌性強，使用，近越來越多地應用在手提袋印刷制作上，通常可選用120g或140g的白色或黃色牛皮紙，手提袋印刷以后需過油以保護油墨不在做袋時擦臟 。
If you choose copper plate or cardboard printed handbags, you usually need to coat them to increase their strength. In addition, because of its toughness and environmental protection, white kraft paper is more and more widely used in the printing of handbags. White or yellow kraft paper of 120g or 140 g is usually chosen. Oil is needed after printing to protect ink from being dirty when making bags.
手提袋印刷加工工藝：
Handbag printing process:
手提袋印刷后,可以根據不同的需要,選擇覆膜,也有燙金或者UV等后期制作,在后期制作時,需要覆膜的要先覆膜,可有亮膜與啞膜選擇,然后根據印刷的尺寸去做模切版,在模切機上一張一張的進行壓切,之后再根據模切出的痕跡進行手工操作,這也是在整個糊制手提袋中慢的一個環節,糊好后進行穿繩.手提袋印刷的繩子可選用尼龍繩，棉繩或紙繩。如手提袋印刷尺寸較大時，需在繩孔處加固鉚釘以抗拉力
After handbag printing, it can be chosen to cover film according to different needs, as well as post-production such as hot stamping or UV. In post-production, it is necessary to cover film first, and then choose bright film and dumb film. Then, according to the size of printing, die-cutting is done one by one on the die-cutting machine, and then hand-cutting is carried out according to the marks of die-cutting. The manual operation is also a slow link in the whole pasted handbag. After pasting, the handbag can be threaded. The printed rope of the handbag can be nylon rope, cotton rope or paper rope. If the printing size of handbag is large, rivets should be strengthened at the rope hole to resist tension.
We specially provide Jinan handbag printing service for you. For more information, please visit our website: http://www.seven2000.com. We will have more content waiting for you to see.
