For us, we often hear the word "picture album printing" in our daily life. In fact, the products printed by picture albums are generally more beautiful. We often see some information we want from some exquisite picture albums, which gives readers a new vision and can attract people's attention. Therefore, in recent years, many businesses have done so. They will choose to print the products into exquisite picture albums, so as to achieve an objective propaganda. Similarly, we need to pay attention to a lot of things in the process of making picture albums, and it is very important to strictly guarantee the quality of the products. So when printing picture albums, we usually need to pay attention to those links. Let's go in and learn about them together.

呢我們要觀察這個樣張的質量怎么嚴，可以在印刷的過程中進行抽樣檢查，在正式印刷的不是很長的時候要確定好印刷機器的供墨量，上水量是不是有些不一樣，多抽樣檢查是很有必要的，如果不行的話我們可以隨時進行調整，同樣的也要求廠家印刷的速度也是不能改變的，否則印刷出來的美感就不好，然后我們要在印刷的過程中插入警示的紙條，這樣可以方便我們檢查上水量。

First of all, we need to observe how strict the quality of this sample sheet is. We can carry out sampling inspection in the process of printing. When the formal printing is not very long, we need to determine the amount of ink supplied by the printing machine. Is the amount of water used somewhat different? It is necessary to do more sampling inspection. If not, we can do it at any time. Adjustment also requires that the printing speed of the manufacturer can not be changed. Otherwise, the aesthetic feeling of the printing is not good. Then we need to insert warning notes in the printing process, so that we can check the amount of water.

在廠家印刷的前期我們要勤觀察上水量，看看是不是在印刷的過程中有重影或者水扛，如果有的話我們要及時調整，多觀察印刷設備是不是發熱還有生產車間通風效果是不是好，這些問題都是需要我們注意的。

In the early stage of printing, we should observe the amount of water, see if there are duplicates or water carriers in the process of printing. If there is any, we should adjust it in time. We should observe the heat of printing equipment and the ventilation effect of production workshop. These problems need our attention.

還有一點是需要我們注意的就是油墨的變化，觀察是不是是不是編制了，還有就是量夠不夠，要避免油墨在機器上干燥，防止出現油墨不均勻。

Another thing we need to pay attention to is the change of ink, whether it is compiled or not, and the amount is insufficient, to avoid ink drying on the machine, to prevent ink uneven.

后一點就是我們在印刷的時候應該注意避免印刷過程中出現重影，印刷出來的不太美觀，也不能用。我們可以選印刷幾次，觀察紙張的是否可以在進行印刷。檢查橡皮布的張力，新的橡皮布容易松弛，注意分次收緊，但也不可過于繃緊。還有就是就是叼牙的調節。叼牙的調節不良和保養不當是造成重影的一大原因。因此應定期做好叼牙的調節和維護檢查，使之經常保持良好的工作狀態。印刷結束時需要注意確認印數。印刷將結束時，應確認印數是否與生產施工單相符。有缺數需補印的應通知生產管理人員，及時安排補印。

The last point is that we should pay attention to avoid duplication in the process of printing, which is not beautiful and can not be used. We can choose to print several times to see if the paper can be printed. Check the tension of the rubber cloth, the new rubber cloth is easy to relax, pay attention to tightening step by step, but not too tight. There is also the adjustment of teeth. Poor regulation and improper maintenance of teeth are one of the major causes of duplication. Therefore, the regulation and maintenance of teeth should be done regularly to keep them in good working condition. At the end of printing, attention should be paid to confirming the print number. At the end of printing, it should be confirmed whether the printing number is in accordance with the production and construction orders. If there is a shortage to be reprinted, the production management personnel shall be notified and the reprinting shall be arranged in time.