不干膠印刷模切的方式 跟我們普通的卡紙和銅板卡等還是有區別的，由于不干膠材質是帶粘性的，有透明材質和塑料材質，材質不同模切的時分都會有不同等的模切方式。下面我們來看一下影響模切少有以下三點還是要留意的：
The way of die-cutting for non-adhesive printing is different from our common cardboard and copper card. Because the material of non-adhesive is sticky, transparent and plastic, there will be different ways of die-cutting when the material is different. Next, let's take a look at at at least three points that affect die-cutting.
一，在于面材的品種選擇上，普通的印刷面材都是分為紙張和薄膜兩種，不過這兩種面材的切斷原理有些不同，模切的時分按常理來說是必需將面切和粘合劑一同切斷的。
First, in the selection of the types of fabrics, ordinary printed fabrics are divided into paper and film, but the cutting principle of these two kinds of fabrics is somewhat different. It is necessary to cut the face and adhesive together when die cutting.
但實踐是刀和壓力的雙重作用下才斷裂的。有時分模切刀也一定要比擬尖利些，所以假如有時分會看到一些標簽有毛邊就是由于自然斷裂而構成的。我們就要留意一下，相似這樣的毛邊嚴厲來說是屬于不合格產品的。
But practice is broken only under the dual action of knife and pressure. Sometimes the parting cutter must be more sharp than others, so if we sometimes see some labels with hairy edges, it is because of natural fracture. We have to pay attention to the fact that similar rough edges are strictly unqualified products.
第二，在于面材的強度上，強度的大小主要在于面材自身的纖維，不同的面材濕度和厚度都是不同的，特別是在伍月和六月份的時分受黃梅天氣的影響，紙張收縮不同排刀版也幾有點差距。而在停止模切的時分，假如環境的濕度比擬大，那么紙張資料在遭到環境影響后強度就會削弱，十分容易就會斷裂，所以在停止不干膠印刷的時分一定要合理的從資料的強度去思索，這樣才能夠有效的提升印刷的效率和保證印刷的質量。
Secondly, the strength of the fabrics is mainly due to the fibers of the fabrics themselves. The humidity and thickness of different fabrics are different, especially in June and June when the weather is affected by Huangmei, the shrinkage of paper is also a little different from the layout. When the die-cutting is stopped, if the humidity of the environment is comparatively large, the strength of the paper material will be weakened after being affected by the environment, and it will be very easy to break. Therefore, when the non-adhesive printing is stopped, we must think reasonably from the strength of the material, so as to effectively improve the efficiency of printing and ensure the quality of printing.
第三，在于面材的厚度，不同或不同資料的紙張厚度都是不同的，而厚度也是直接關系都模切的效果，假如紙張厚，那么就越容易停止模切，而紙張薄，就很容易呈現切穿的情況。所以在印刷的時分既要看好面材的厚度又要模切的力度。
Thirdly, the thickness of the surface material, the paper thickness of different brands or different materials are different, and the thickness is directly related to the effect of die-cutting. If the paper is thick, the easier it is to stop die-cutting, while the paper is thin, it is easy to present the situation of cutting. So when printing, we should not only look at the thickness of the surface material, but also the strength of die cutting.
模切這一工藝是請求比擬高的一門技術，不光是不干膠印刷的模切，畫冊樣本，宣傳冊樣本等有時分都需求應用到模切。模切是一個綜合性 復雜性于一體的裁切方式，模切的好與壞直接關系到不干膠印刷所印刷出來產品的好壞程度，所以印刷時就一定要多加注重。
Die-cutting is a technology that requires a high level of comparison. It is not only the die-cutting of non-adhesive printing, but also the sample of picture album and brochure, which are sometimes required to be applied to die-cutting. Die-cutting is a comprehensive and complex cutting method. The quality of die-cutting is directly related to the quality of the products printed by non-adhesive printing, so we must pay more attention to it when printing.
This article is dedicated by Jinan Painting Book Printing Friendship. For more knowledge, please click on: sincere attitude at http://www.seven2000.com. We will provide you with comprehensive services. More relevant knowledge will be dedicated to you one after another. Please look forward to it.
