手提袋印刷目前已作為一種展示企業形象、文化的重要物品，主要作用是使用、宣傳等等，手提袋印刷制作的好壞也會直接影響人們對企業形象的認識。因此，在手提袋進行印刷制作時需要注意一定的事項，下面我們會給大家展開介紹。
At present, handbag printing has been used as an important material to show corporate image and culture. Its main function is to use and publicize. The quality of bag printing will directly affect people's understanding of corporate image. Therefore, we need to pay attention to certain matters when printing the handbag. We will introduce it to you.
1.手提袋印刷制作過程中需保證油墨的性質，避免陽光直射。
1. It is necessary to ensure the nature of the ink and avoid direct sunlight during the printing process of the bag.
2.關于手提袋繩子的選用有尼龍繩、紙繩、棉繩等。
2. There are nylon rope, paper rope, cotton rope and so on.
3.手提袋印刷后需要覆膜壓型、粘盒穿繩才可告成。
3. After printing, the bag needs to be covered with plastic film, glued box and threaded rope.
4.制作過程中，保持室內溫度，控制在10-26攝氏度內。
4. During the production process, keep the indoor temperature within 10-26 ℃.
5.如手提袋尺寸較大，需在繩孔處加固鉚釘以增大抗拉力。
5. If the size of the bag is large, the rivet should be reinforced at the rope hole to increase the tensile strength.
6.在進行手提袋印刷制作時，為了防止油墨出現出現粘結，油墨需要經常性的進行攪拌，以防影響手提袋的整體呈現效果。
6. In order to prevent the ink from sticking, the ink should be stirred regularly to prevent the overall presentation effect of the bag.
7.油墨的處理上也不要太稀，那樣印刷出來的產品會存在色差，可以加入增稠劑進行適當的調節。
7. The ink treatment should not be too thin, as the printed product will have color difference, thickener can be added for proper adjustment.
8.手提袋的尺寸通常根據包裝品的尺寸而定，通用的標準尺寸分三開、四開或對開三種。每種又分為正度或大度兩種。
8. The size of the bag is usually determined according to the size of the package, and the general standard size is divided into three open, four open or half open. Each type can be divided into positive degree or large degree.
9.在手提袋印刷制作的過程中，要注意使用的是同種油墨，不要將不同性質的油墨混合，兩者無法相融的情況會影響手提袋的質量。
9. In the process of bag printing, pay attention to the use of the same kind of ink, do not mix different nature of ink, the two can not blend will affect the quality of the bag.
