The variety and color pattern of the desk calendar are also very rich, which makes people have a bright feeling. How are these exquisite desk calendars printed? The display desk calendar introduced by Jinan desk calendar printing factory today is a very personalized stamping process:

　　燙金技術已廣泛應用于畫冊印刷,因其的生產和市場廣泛贊譽,為了不斷提高印刷品的細膩程度和價值,從這個特殊的燙金技術,燙金技術分為傳統燙金技術和特殊的燙金技術兩大陣營。

　　Bronzing technology has been widely used in album printing. Due to its exquisite production and widely praised by the market, in order to continuously improve the fineness and value of printing products, from this special bronzing technology, bronzing technology is divided into two camps: traditional bronzing technology and special bronzing technology.

　　特種燙印與傳統燙印的區(qū)別

　　Difference between special hot stamping and traditional hot stamping

　　1.在燙印過程中不需要制作金屬浮雕板，成本低，速度快，只要有正負極就可以燙印。

　　1. In the process of hot stamping, there is no need to make metal relief plate, which has low cost and fast speed. As long as there are positive and negative poles, it can be hot stamping.

　　2.適合生產小批量、多品種個性化燙金產品。

　　2. Suitable for the production of small batch, multi variety personalized bronzing products.

　　3.燙印溫度低，100 - 130度。

　　3. Stamping temperature is low, 100-130 ℃.

　　4.適用于大面積、細線、圖片的燙印。

　　4. Suitable for large area, thin line and picture hot stamping.

　　燙印基板不取，如:各種塑料薄膜、紙張、皮革、金屬、玻璃等。

　　Hot stamping substrate is not used, such as: all kinds of plastic film, paper, leather, metal, glass, etc.

　　在定制臺歷的過程中，還要控制烘烤時間和溫度，達到協調的效果。烘烤時間不宜太長,更好控制在5到10分鐘,然后熱沖壓工藝,在燙印,也要把握好時機,大概15秒25秒之間,另一方面,也應注意,采用熱沖壓工藝的不同方式,注意事項是不同的,不適應上述各種考慮。

　　In the process of customizing the desk calendar, the baking time and temperature should be controlled to achieve a coordinated effect. Baking time should not be too long. It is better to control it within 5 to 10 minutes, and then hot stamping process. In hot stamping, we should also grasp the opportunity, about 15 to 25 seconds. On the other hand, we should also pay attention to the different ways of hot stamping process, the precautions are different, which are not suitable for the above considerations.

　　燙印:在燙印過程中，金、銀燙印箔的粘接層與感光膜的熱塑性部分由于熱熔粘接而成，而熱固性部分不粘接，從而實現燙印膜的轉移。燙印設備有塑料封口機、熨斗、燙印機等用于燙印。保持溫度在100到130度之間。

　　Hot stamping: in the process of hot stamping, the bonding layer of gold and silver hot stamping foil and the thermoplastic part of the photosensitive film are formed by hot-melt bonding, while the thermosetting part is not bonded, so as to realize the transfer of the hot stamping film. Hot stamping equipment has plastic sealing machine, iron, hot stamping machine for hot stamping. Keep the temperature between 100 and 130 degrees.

　　燙印產品:燙印后輕輕除去燙印膜上多余的部分，成為令人眼花繚亂的成品。

　　Hot stamping products: after hot stamping, gently remove the excess part of the hot stamping film to become a dazzling finished product.

　　以上是濟南臺歷掛歷印刷廠家小編為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://www.seven2000.com

　　The above is the relevant content introduced by Jinan calendar printing factory. If you want to know more, please visit the website: http://www.seven2000.com