The equipment management department is responsible for the lubrication of Jinan label printing equipment, with the cooperation of the production department and the supply department. The equipment management department first establishes the lubricating oil purchase system, lubricating material warehouse management and safety fire protection system, lubricating material distribution system and lubricating oil use system. Second, organize technical personnel to prepare equipment lubrication chart and annual equipment cleaning and oil change plan, guide and supervise relevant personnel to carry out lubrication work and solve difficult problems in lubrication work; third, summarize and promote lubrication work experience in time.

　　潤滑油的采購、驗收、儲存和分配

　　Purchase, acceptance, storage and distribution of lubricating oil設備管理部采購人員應熟悉印刷設備，了解潤滑油的性能特點及相關的生產、銷售企業，確保購買合適的潤滑油;潤滑油按嚴格的油品驗收制度入庫;倉庫人員應在相關技術人員的指導下科學合理地儲存油品;相關人員應根據所編制的設備潤滑計劃、領用卡、領用潤滑油，以及潤滑油使用說明書，對設備進行潤滑工作。

　　The purchasing personnel of the equipment management department shall be familiar with the printing equipment, understand the performance characteristics of the lubricating oil and the relevant production and sales enterprises, and ensure to purchase the appropriate lubricating oil; the lubricating oil shall be warehoused according to the strict oil product acceptance system; the warehouse personnel shall store the oil scientifically and reasonably under the guidance of the relevant technical personnel; Relevant personnel shall lubricate the equipment according to the prepared equipment lubrication plan, receiving card, receiving lubricating oil and lubricating oil operation instruction.

　　濟南標簽印刷設備潤滑工作的內容

　　Contents of lubrication work of Jinan label printing equipment日常潤滑維護

　　Daily lubrication maintenance

　　開機前，生產部需對印刷設備的潤滑系統、傳動機構、控制系統、滑動面等進行檢查，確保設備各部分在開機前均配置了良好的潤滑;工作前要仔細清潔設備，鐵質、雜質等，擦拭干凈，在潤滑部潤滑。

　　Before start-up, the production department shall check the lubrication system, transmission mechanism, control system, sliding surface, etc. of the printing equipment to ensure that all parts of the equipment are equipped with good lubrication before start-up; before work, the equipment shall be cleaned carefully, iron and impurities shall be removed, wiped clean, and lubricated in the lubrication department.

　　定期維護

　　Regular maintenance

　　設備管理部組織相關人員對印刷設備進行定期檢查，疏通潤滑油路，增加油料量，清理油過濾器、油氈、油品標準，對損壞的油泵、油管、供油系統等進行更換和維修。如果印刷設備長期處于關閉狀態，應進行防銹潤滑處理。

　　The equipment management department shall organize relevant personnel to conduct regular inspection on the printing equipment, dredge the lubricating oil circuit, increase the oil quantity, clean the oil filter, felt and oil standard, and replace and repair the damaged oil pump, oil pipe and oil supply system. If the printing equipment is shut down for a long time, it should be treated with antirust lubrication.

　　更換潤滑油

　　Change lubricating oil

　　經過一段時間后，印刷設備的潤滑劑在使用過程中會由于氧化等因素的影響而逐漸變質。一些印刷企業為了降低成本,往往試圖延長潤滑油的使用,不知道潤滑劑的性能和技術指標的惡化已經無法滿足潤滑需求,然后繼續使用在印刷設備會產生消極的影響。有些印刷企業將廢油沉淀后使用，雖然沉淀可以除去大部分廢油污泥、水和機械雜質，但其他油品技術指標沒有改善，對設備的磨損將是長期的。因此，要想循環出油，必須更換所有的新油。

　　After a period of time, the lubricant of printing equipment will gradually deteriorate due to oxidation and other factors in the use process. In order to reduce the cost, some printing enterprises often try to prolong the use of lubricating oil. They do not know that the deterioration of lubricant performance and technical indicators has been unable to meet the lubrication demand, and then continue to use it in printing equipment will have a negative impact. Some printing enterprises use waste oil after sedimentation. Although sedimentation can remove most of waste oil sludge, water and mechanical impurities, other oil technical indicators have not been improved, and the wear of equipment will be long-term. Therefore, in order to recycle the oil, all new oil must be replaced.

　　更換潤滑油時應注意:保養時盡量換油;更換機油不容易報廢，如機油仍良好，可稍加處理(如沉淀過濾、除水、雜質)后再使用二次設備;廢油應收集和再處理，以防止環境污染。

　　When changing lubricating oil, attention shall be paid to: change oil as much as possible during maintenance; change oil is not easy to be scrapped, if the oil is still good, it can be treated slightly (such as sedimentation filtration, water removal, impurities) before using the secondary equipment; waste oil shall be collected and reprocessed to prevent environmental pollution.

　　以上是濟南標簽印刷廠家為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://www.seven2000.comThe above is the related content introduced by Jinan label printing factory. If you want to know more, please visit the website: http://www.jingyinshua.com