There are five main steps in the process of picture album printing: first, the planning of printing, printing things to fit the theme, the way of printing, the size of the layout, the subject matter of the printed matter, the number of colors used in paper or printing, and also the selection of merchants, all of them should be serious, as long as the consultation is good, they can make satisfactory products.

第二點便是要根據印刷規劃來停止文案的撰稿、設計和版面規劃等，是制造完成的前置作業的程序，同時也需求布置攝影及插圖的繪制，與對應的商家停止圓滿的配合。

The second point is to stop copywriting, design and layout planning according to the printing plan, which is the process of pre-production. At the same time, it also needs to arrange photography and illustration drawing, and stop cooperating with the corresponding businessmen satisfactorily.

第三點是根據版面規劃的初稿，將其文案、照片和插圖、正確位置與正確的顏色標示等，循序的布置在完稿紙上或以電子稿方式處置完好個稿件，并且明白指示制版之各項特殊請求的各項特殊請求指示，這就是制版的前置作業。

The third point is that according to the preliminary draft of layout planning, its copy, photos and illustrations, correct location and correct color labeling, etc., are arranged on the finished paper in sequence or disposed of in good condition by electronic manuscript, and the specific request instructions indicating the special requests for plate-making are clear. This is the pre-operation of plate-making.

第四點就是完稿完成進入制版一步，圖片都是以電子分色機掃描分色，文字、線條以黑白相機拍照，沖出正確的過網數，并將文字、插圖等依照完稿上之指示拼板，然后停止曬板作業，然后印出彩色打樣送回設計者的手中停止校正。像是用電子完稿處置便需交輸出中心的輸出底片，也需求細致的填寫輸山工作單或著是指示單、明白的指示輸出的線數及彩色、頁數，有無造字及規格數量等項目，防止溝通上之錯誤，形成不用要的損失。

The fourth point is to finish the manuscript and enter the plate-making step. The pictures are scanned by an electronic color separator. The text and lines are photographed by a black-and-white camera, and the correct number of crossings is dashed out. The text and illustrations are put together according to the instructions on the finished manuscript. Then the sun-drying plate is stopped, and the color proofing is printed and sent back to the designer to stop. Correcting. For example, it is necessary to submit the output negatives of the output center for electronic manuscript completion. It is also necessary to fill in the mountain work sheet meticulously or refer to the number of lines and colors and pages of the output of the instruction sheet, the number of lines and pages with clear instructions, and the number of characters and specifications, so as to prevent communication errors and unnecessary losses.

第四點也是印刷前的后一個步驟，就是要檢查彩色打樣能否契合完稿上一切指示的停止程序，有顏色的校正與它修正時一定要特別認真用紅筆寫出詳細易懂的文字闡明或位置輪廓，正確的傳達給制版的人員，避免有不用要的損失。

The fourth and final step before printing is to check whether the color proofing meets the stop procedure of all instructions on the manuscript. When correcting the color proofing and correcting it, we must carefully write out the detailed and understandable text or position outline in red pen, and correctly convey it to the plate-making personnel so as to avoid unnecessary. Loss.

第六點是印刷時，要將修正好的四色網片轉曬成印刷用版，送上印刷機器，就開端了后的印刷。假如要想在印刷機上得到理想的印刷廢品，就要理解印刷要素，由于其中有許多的可變要素，對印刷的質量影響很大，所以，要認清這些要素。

The sixth point is that when printing, the corrected four-color screen should be converted into a printing plate and sent to the printing machine, so that the final printing can be started. If you want to get ideal printing waste on the printing press, you need to understand the printing elements, because there are many variable elements, which have a great impact on the quality of printing, so we need to recognize these elements.

第五點則是印刷后了，印刷品的后一道手續，就是裝訂加工，普通單張平面式用到多的就是裁切、壓線、折疊等，要依據畫冊的頁數、紙張的類型，精巧度與運用方式和目的來停止決議了。

The fifth point is that after printing, the final procedure of printing is binding processing. The most commonly used single sheet is cutting, pressing, folding and so on. Decisions should be stopped according to the number of pages in the picture album, the type of paper, the delicacy and the way and purpose of use.